Thank you for downloading
Ubuntu Server 18.04.4
for Raspberry Pi
Your download should start automatically. If it doesn’t, download now.
We will walk you through the steps of flashing Ubuntu Server on to your Raspberry Pi and getting logged in.
What you’ll need
- A Raspberry Pi 2, 3, or 4
- A micro-USB power cable for the Pi 2 & 3, or a USB-C power cable for the Pi 4
- A microSD card with the Ubuntu Server image
- A monitor with an HDMI interface
- An HDMI cable for the Pi 2 & 3 and a MicroHDMI cable for the Pi 4
- A USB keyboard
Flash Ubuntu onto your microSD card
Boot Ubuntu Server
- You need to attach a monitor and keyboard to the board. You can alternatively use a serial cable.
- Now insert the microSD card
- Plug the power adaptor into the board
Login to your Pi
When prompted to log in, use “
ubuntu” for the username and the password. You will be asked to change this default password after you log in.
You are now running the Ubuntu Server on your Raspberry Pi.
Things to try next
Here are a few things you can do now that you have your Raspberry Pi running Ubuntu.
Install a desktop
You can install a desktop if you like, here are some popular ones:
sudo apt-get install xubuntu-desktop
sudo apt-get install lubuntu-desktop
sudo apt-get install kubuntu-desktop
Get started with snaps
Your board is now ready to have snaps installed, it’s time to use the snap command to install your first snap.
The Snap Store is where you can find the best Linux apps packaged as snaps to install on your Ubuntu device and get started with your secure IoT journey.